CPU 1.Built in with an Intel® Quad-Core Celeron® N3160 SoC (1.6 GHz) * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components. 2.2 MB Cache
Memory 1.2 x DDR3L SO-DIMM sockets supporting up to 8 GB of system memory * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed. 2.Dual channel memory architecture 3.Support for DDR3L 1600 MHz memory modules * Due to an SoC limitation, if a 1333 MHz memory is installed, it will be downgraded to 1066 MHz. 4.Support for non-ECC memory modules (Please refer "Memory Support List" for more information.) Onboard Graphics Integrated in the SoC: 1.1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz 2.1 x HDMI port, supporting a maximum resolution of 3840x2160@30 Hz Maximum shared memory of 512 MB Audio 1.Realtek® ALC887 codec 2.High Definition Audio 3.2/4/5.1-channel
LAN 1.2 x Realtek® GbE LAN chips (10/100/1000 Mbit) * Teaming is not supported.
Expansion Slots 1.1 x PCI Express x1 slot, running at x1 2.1 x half size Mini PCIe slot (MPCIE1) (The PCI Express x1 and Mini PCIe slots conform to PCI Express 2.0 standard.)
Storage Interface Chipset: 1.2 x SATA 6Gb/s connectors 2.1 x MSATA connector (MSATA_MPCIE2)
USB Chipset: 1.4 x USB 3.0/2.0 ports on the back panel 2.4 x USB 2.0/1.1 ports available through the internal USB headers
Internal I/O Connectors 1.1 x 4-pin ATX 12V power connector 2.1 x CPU fan header 3.1 x system fan header 4.2 x SATA 6Gb/s connectors 5.1 x MSATA connector (MSATA_MPCIE2) 6.1 x SATA power connector 7.1 x front panel header 8.1 x front panel audio header 9.1 x battery cable header 10.2 x USB 2.0/1.1 headers 11.6 x serial port headers 12.6 x serial port power select jumpers 13.1 x D-Sub header 14.1 x digital microphone header 15.1 x LVDS header 16.1 x LVDS drive voltage jumper 17.1 x flat panel display header 18.1 x flat panel display power jumper 19.1 x flat panel display switch header 20.1 x backlight switch header 21.1 x speaker header 22.1 x buzzer header 23.1 x chassis intrusion header 24.1 x LPT/GPIO header 25.1 x volume control header 26.1 x LPT configuration jumper 27.1 x GPIO power selection jumper 28.1 x GPIO status configuration jumper 29.1 x jumpers for switching USB signals 30.1 x Clear CMOS jumper
Back Panel Connectors 1.1 x DC In power connector 2.1 x HDMI port 3.1 x D-Sub port 4.4 x USB 3.0/2.0 ports 5.2 x RJ-45 ports 6.2 x audio jacks (Line Out, Mic In)
I/O Controller 1.iTE® I/O Controller Chip
H/W Monitoring 1.System voltage detection 2.CPU/System temperature detection 3.CPU/System fan speed detection
BIOS 1.2 x 64 Mbit flash 2.Use of licensed AMI UEFI BIOS 3.Support for DualBIOS™ 4.PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features 1.Support for Xpress Install 2.Support for @BIOS 3.Support for APP Center * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications
Bundle Software 1.Norton® Internet Security (OEM version)
Operating System 1.Support for Windows 10/8.1/7 64-bit * Please download the "Windows USB Installation Tool" from GIGABYTE's website and install it before installing Windows 7.
Form Factor 1.Thin Mini-ITX Form Factor; 17.0cm x 17.0cm
Remark 1.Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website. 2.Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.